China supplier Cheap Price Overhead Track Conveyor Drive Chain Uh-5075

Product Description

 

Detailed Photos

 

Product Description

An overhead conveyor is a type of conveyor system that is installed above the working area, typically in a manufacturing or industrial setting. It is used to move products, materials, or components from 1 point to another in a factory or warehouse, and is particularly useful for transporting heavy or bulky items that are difficult to move manually.

Overhead conveyors are commonly used in a variety of applications, such as automotive assembly lines, food and beverage processing, material handling and distribution, and storage and retrieval systems. They can be used for both horizontal and vertical transportation and can move products along a fixed path or in a continuous loop.

Some specific uses of overhead conveyors include:

  1. Assembly line transportation: Overhead conveyors are commonly used in manufacturing assembly lines to transport parts and components to different workstations along the line.

  2. Powder coating: Overhead conveyors are used in powder coating operations to move products through a paint booth, where they are coated with a dry powder before being cured in an oven.

 

Spare parts item Features Photo
Up-Down track for rising or falling areas. standard diameter is 1.2 meters,180º angle. it can be cut based on any necessary angles of any install conditions.the angle should not be more than 45º angle. the distance between 2 adjiacent hangers should be considered.
Check track There is a hatch which can open the track, through the hatch, worker can dismantle or install, check or maintain the conveying chains. Driving device for each conveying route is usually located between driver and take-up device for easy checking and maintenace.
Take-up device

(Tensioner)

Keep the chains in the state of original tension and compensate for the tensile deformation caused by tensile force or telescopic deformaton caused by varied temperature while working.
Make sure certain tensile force between driver and take-up device.   Install it behind driver about distance 3~6 meters. Better have no up-down track behind take-up device. 
Straight track for where conveyor chain go straight. it can be cut according to the specific install condition. standard length is 3 meters.
Caterpiller driver device Two types-Standard type and heavy duty type.
The driving device adjust the momentum that the motor ouput, after speed reduction unit increase its power which is to be passed to the driver caterpiller, the pusher dogs on which transport the chain so that chain can move forward.
Hanger  
Several types hangers:

Cross type hanger;

Y type hanger;

I type hanger;

Sprocket wheel hanger;

U-type hanger;

Bearing hanger;

Customized.

Automatic oil sprayer Specially designed for various automatic conveying chain;

More convenient to check oil-feeding diyusyion nsdrf CHINAMFG oil volume in the transparent oil pipes.

 

 
 

 

FAQ

Q1: Are you trading company or manufacturer ?
A: We are factory.

Q2: How long is your delivery time and shipment?
1.Sample Lead-times: generally 30 workdays.
2.Production Lead-times: 60 workdays after getting your deposit.

Q3. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery.
We’ll show you the photos of the products and packages before you pay the balance.

Q4: What is your advantages?
1. Manufacturer,the most competitive price and good quality.
2. Perfect technical engineers give you the best support.
3. OEM is available.
4. Rich stock and quick delivery.

Q5. If you can’t find the product on our website,what do you next?
Please send us inquiry with product pictures and drawings by email or other ways and we’ll check

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material: Alloy
Structure: Combined Chain
Surface Treatment: Polishing
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

drive chain

How does the material hardness of a drive chain affect its durability?

The material hardness of a drive chain plays a significant role in determining its durability and resistance to wear. Here is a detailed explanation:

Material hardness refers to the ability of a material to resist indentation, abrasion, and penetration by external forces. In the context of drive chains, the hardness of the chain’s components, such as pins, bushings, and rollers, directly affects the chain’s durability and lifespan.

When it comes to drive chain durability, the following factors come into play:

  • Resistance to Wear: A higher material hardness typically results in better resistance to wear. Drive chains with harder materials can withstand the friction and contact forces encountered during operation, minimizing the wear on critical components. This translates to extended chain life and reduced maintenance requirements.
  • Impact Resistance: The material hardness of a drive chain also affects its ability to resist impact forces. Chains operating in environments with frequent impacts or shock loads, such as in mining or heavy-duty applications, require high hardness materials to withstand the sudden stresses without deformation or failure.
  • Resistance to Deformation: Harder materials exhibit greater resistance to deformation under load. This is particularly important in drive chains where precise interlocking of chain components is necessary for efficient power transmission. Chains with higher material hardness maintain their shape and dimensional integrity, ensuring consistent performance and minimizing the risk of chain elongation or misalignment.
  • Corrosion Resistance: While material hardness primarily affects wear resistance, it can indirectly impact the chain’s resistance to corrosion. Certain high-hardness materials, such as stainless steel or specific alloys, offer improved corrosion resistance compared to softer materials. This is especially relevant in applications where the chain is exposed to corrosive environments, such as marine or chemical industries.

It is important to note that while higher hardness generally leads to improved durability, excessive hardness can also result in brittleness and reduced impact resistance. Therefore, a balance must be struck between hardness and other mechanical properties to ensure optimal performance and durability of the drive chain.

Manufacturers typically specify the appropriate hardness level for drive chain components based on the specific application requirements. These specifications take into account factors such as load capacity, operating conditions, anticipated wear rates, and desired service life.

Regular maintenance practices, such as proper lubrication, periodic inspection, and tension adjustment, are essential for maximizing the durability and performance of the drive chain, regardless of its material hardness.

By selecting a drive chain with the appropriate material hardness and implementing proper maintenance practices, operators can ensure optimal durability, extended chain life, and reliable power transmission in various industrial applications.

drive chain

Can a drive chain be used in a hydraulic or pneumatic system?

A drive chain is not typically used as a primary power transmission method in hydraulic or pneumatic systems. Hydraulic and pneumatic systems rely on fluid power to transmit force and motion. However, drive chains can still be used in certain auxiliary or secondary applications within these systems. Here is a detailed explanation:

In hydraulic or pneumatic systems, the primary power transmission is achieved through the use of hydraulic fluid or compressed air. The fluid or air is pressurized and controlled to generate force and motion in actuators or motors. Drive chains, on the other hand, are commonly used in mechanical power transmission applications where direct force is required, such as in mechanical drives or conveyors.

While drive chains may not be used as the main power transmission method, they can be employed in auxiliary or secondary applications within hydraulic or pneumatic systems, including:

  • Tensioning and Positioning: Drive chains can be used to tension belts or other components in a system that is driven by hydraulic or pneumatic power. They can provide accurate positioning and tension control in certain applications.
  • Linkage Mechanisms: Drive chains can be utilized as part of mechanical linkage mechanisms in hydraulic or pneumatic systems to transmit motion or force between different components.
  • Drive Chain Actuators: In some cases, specialized drive chain actuators can be used in combination with hydraulic or pneumatic power to provide linear or rotary motion for specific applications.
  • Accessories and Ancillary Devices: Drive chains can be employed in various accessories or ancillary devices within hydraulic or pneumatic systems, such as tensioners, clutches, or braking mechanisms.

It is important to note that the selection and application of drive chains in hydraulic or pneumatic systems require careful consideration of the specific requirements, load conditions, and compatibility with the fluid power components. Consulting with experts or manufacturers is recommended to ensure the proper integration and performance of the drive chain in such applications.

China supplier Cheap Price Overhead Track Conveyor Drive Chain Uh-5075  China supplier Cheap Price Overhead Track Conveyor Drive Chain Uh-5075
editor by CX 2024-04-22